|
|
| Your Position
>>Our Products>>
Automatic
Control Systems>> Visible
Intelligent Control Systems Series SF-100/
Soft
Start Control Cabinets Series CSS for Compressors
|
| |
|
Automatic
Control System
Visible
Intelligent Control Systems Series SF-100
|
|
Technical Parameters:
· High-brightness
LCD 320*240 matrix, display of character,
figure, and curve available;
· User-oriented
programmed instructions: up to 120pcs，average
execution time: 0.2us/piece;
· RS485
or RS232 serial communication mode, consistent
with the communication protocol of Modbus;
· 26-channel
analog input, 32-channel on-off input, 16-channel
on-off input;
|
|
|
|
· Menu selection
for supported sensor, compatible with multiple
sensing signals, 4～20mA or 0～5V，0～10mA platinum
resistance, and thermocouple; processing precision
of analog signal: 0.1%;
· Module design,
16-bit data bus, 20-bit address bus, 12-bit Analog-Digital
Conversion;
· User-friendly
interface, menu-based two-class password setting;
Features and Specifications:
· 80186 CPU main
controller circuit, level conversion, and buffer
circuit; intensively anti-interference switching
power supply; high-performance and miniaturized
relay for I/O output drive interlock control circuits;
· Its operating
system is designed by modularized and structured
program consisted of master program, interrupt
program, serial communication program, calculating
subprogram, display and drive subprogram, and
control logic model, etc. Its integral design
is very compact, applicable in the installation
of integrated system.
Technical Parameters:
|
|
No.
|
Analog
Quantity/Switching Value
|
Size
of Display
|
Overall
Dimensions
(L×W×H)mm
|
Service
Conditions
|
|
01
|
16/24
|
6”
|
363×193×63
|
1.
Indoor installation;
2.
Sea-level Elevation: ≤
2000m;
3.
Environmental Temperature:
－10℃～55℃; Relative Humidity
≤85％;
4.
No explosive gas and no conductive
dust;
5.
No strenuous vibration and
impaction;
6.
Well ventilated;
|
|
02
|
16/24
|
6”
|
363×193×63
|
|
03
|
16/24
|
6”
|
363×193×63
|
|
04
|
24/32
|
9”
|
388×258×63
|
|
05
|
24/32
|
9”
|
388×258×63
|
|
06
|
32/48
|
12”
|
463×293×63
|
|
07
|
32/48
|
12”
|
463×293×63
|
|
| Note: Custom design
of special specifications available. |
|
|
|
CSS Series Soft-start
Control Cabinet for Compressor
It is applicable in 10m3/min, 20m3/min, 40m3/min
compressors to avoid the torque shock caused by
direct start and the damage of drive parts (e.g.
axle and bearings), and to effectively minify
the pickup current of motor to avoid error operation
of equipment and gauge caused by instantaneous
voltage drifting-down of power supply circuit
while motor starts, with the functions of circuit
break protection and overload protection. Moreover,
it has the prevention and control function for
cooling water, lubricant, exhaust temperature
and pressure.
|
Technical
Parameters:
· Supply Voltage：380V/50Hz
· Start Mode:
soft start; start time and start voltage adjustable;
· Halt Mode：soft
halt under normal condition and crash halt
for failure;
· Environmental
Temperature: -25℃~+45℃
· Environmental
Humidity: 90% (relative humidity), no condensed
water or dribble;
· Sea-level
Elevation: 3000m or below;
· Level of
Protection: IP40（custom design available）;
· Cooling Mode:
natural air cooling;
· Requirements
for operating environment: no conductive rust,
no corrosive gas, no flammable media, well
ventilated;
· Input Contact:
passive switching contacts;
· Output Contact:
passive switching contacts, AC 380V, 5A.
|
|
|
|
Type
|
Power of
Motor
(kw)
|
Air Displacement and Exhaust Pressure
of Supported Compressor (m3/min/MPa)
|
Overall
Dimensions
|
|
CSS-75
|
75
|
10/8
|
1600×600×500
|
|
CSS-132
|
132
|
20/8
|
1800×700×600
|
|
CSS-250
|
250
|
42/7
|
1800×700×600
|
|
| Note: Custom design of special
specifications available. |
| |
|
|
